
Home / Capabilities / Infrastructure Products / Deck Panels
Precast Concrete Deck Panels
Precast panels that form the deck of a bridge or structure, set on beams and joined on site.
Overview
What are precast concrete deck panels?
Deck panels are precast concrete units that form the driving or walking surface of a bridge. They are set on the beams or girders and joined together on site.
Full-depth panels replace a cast-in-place deck entirely. Partial-depth panels act as a permanent form and are topped with concrete on site.
Because the panels are made in the plant, a deck can be installed or replaced much faster than one that is formed and poured in place.
Where it is made
Made at these Coreslab plants
Each plant confirms what it makes and the services it offers. Choose a location to see its full capabilities. Links open in a new tab.
- Albuquerque, New Mexico (opens in a new tab)
- Kansas City, Kansas (opens in a new tab)Two types produced: 1) prestressed 3" solid panels used in deck forming for DOT bridges; 2) Precast or Prestressed Ballast Deck Panels for placement on Steel span bridges
- Los Angeles, California (opens in a new tab)
- Marshall, Missouri (opens in a new tab)
- Phoenix, Arizona (opens in a new tab)
- Thomaston, Connecticut (opens in a new tab)
- Tulsa, Oklahoma (opens in a new tab)
Do not see your nearest plant? Contact us and we will point you to the right location.
Applications
Where deck panels are used
New bridges
Decks on precast or steel girders
Consistent plant-cast quality
Less formwork and site labour
Deck replacement
Re-decking of existing bridges
Staged work to keep traffic moving
Shorter closures than cast-in-place decks
Other structures
Pedestrian bridges and walkways
Platforms and decks in buildings
Custom panels designed with our team
Resources
Design data and guides
Technical guides, standard details and plant load tables are in our resource library. The Precast/Prestressed Concrete Institute publishes the industry design standards our plants follow, and each project is built to the requirements of its transportation agency or railroad.
See our bridge beams, our bridge and transportation projects, or the other infrastructure products we manufacture.
Process
From design to delivery
Deck panels start with the project drawings and agency specifications. Our team prepares shop drawings for approval, then casts the panels with their reinforcing and connection details. Each panel is cured under controlled conditions and checked by our quality staff before it ships.
Our plants follow the quality programs of the Precast/Prestressed Concrete Institute, so every piece meets the same dimensions and strength requirements.
Pieces are trucked to site in the order the contractor will set them, including night deliveries where traffic requires it. Services vary by plant, so your local Coreslab team will confirm what is available for your project.
Questions
Precast deck panels: common questions
What is the difference between full-depth and partial-depth panels?
Full-depth panels are the complete deck. Partial-depth panels are thinner, span between the beams and are topped with cast-in-place concrete.
Can deck panels be used on steel bridges?
Yes. Precast deck panels are used on steel as well as precast girders, including existing truss bridges.
How are the panels joined?
Joints and connections to the beams are completed on site to the details in the project design.
Which plants make deck panels?
Availability varies by plant. Contact us and we will direct you to the right Coreslab location.
Contact us
Planning a bridge deck?
Share your plans and our team will help with panel sizes, schedule and delivery.
Get in touch