
Home / Capabilities / Structural Products / Stadium Risers and Raker Beams
Precast Stadium Risers and Raker Beams
Precast seating units and the sloped beams that carry them, for stadiums, arenas and auditoriums.
Overview
What are stadium risers and raker beams?
Stadium risers are stepped precast concrete units that form the seating tiers of a stadium, arena or auditorium. Each unit spans between supports and provides the tread and riser for one or more rows of seats.
Raker beams are the sloped precast beams that carry the risers. Their stepped top surface matches the seating profile, and they transfer the load of the seating bowl to the columns below.
Both are cast in the plant in repeatable forms, so a seating bowl can be produced while site work continues and then erected quickly.
Where it is made
Made at these Coreslab plants
Each plant confirms what it makes and the services it offers. Choose a location to see its full capabilities. Links open in a new tab.
- Albuquerque, New Mexico (opens in a new tab)
- Conway, Arkansas (opens in a new tab)
- Indianapolis, Indiana (opens in a new tab)
- Los Angeles, California (opens in a new tab)Stadium Risers: Single & Two-Step Risers
- Marshall, Missouri (opens in a new tab)
- Miami, Florida (opens in a new tab)
- Oklahoma City, Oklahoma (opens in a new tab)
- Phoenix, Arizona (opens in a new tab)
Do not see your nearest plant? Contact us and we will point you to the right location.
Applications
Where risers and raker beams are used
Stadiums and arenas
Seating bowls for professional and collegiate venues
Repetitive units that speed up erection
Durable concrete for heavy crowd loads
Schools and community venues
Gymnasiums, auditoriums and grandstands
Performing arts and lecture halls
Low-maintenance seating structures
The complete frame
Raker beams, columns and walls from the same plant
Vomitory walls, stairs and landings
One team for design, manufacturing and delivery
Resources
Design data and guides
Technical guides, standard details and plant load tables are in our resource library. The Precast/Prestressed Concrete Institute publishes the industry design standards our plants follow.
See our sports and entertainment projects, our columns and beams, or the other structural products we manufacture.
Process
From design to delivery
A seating bowl starts with engineering. Our team works with the design team on sightlines, spans, loads and connections. Risers and raker beams are then cast in the plant, cured under controlled conditions and checked by our quality staff before they ship.
Our plants follow the quality programs of the Precast/Prestressed Concrete Institute, so every piece meets the same dimensions and strength requirements.
Pieces are trucked to site in the order they will be installed. Services such as installation, finishing and detailing vary by plant, so your local Coreslab team will confirm what is available for your project.
Questions
Stadium risers and raker beams: common questions
Why use precast for stadium seating?
The units are repetitive, so they can be produced efficiently in the plant and erected quickly on site. Precast also gives a durable, consistent finish.
What is the difference between a riser and a raker beam?
The riser is the stepped unit that people sit and walk on. The raker beam is the sloped beam underneath that supports the risers.
Can risers be used indoors?
Yes. Precast risers are used in arenas, gymnasiums, theatres and auditoriums as well as outdoor stadiums.
Which plants make stadium risers?
Availability varies by plant. Contact us and we will direct you to the right Coreslab location.
Contact us
Planning a stadium or arena?
Tell us about your venue and our team will help with the precast seating system.
Get in touch