
Home / Capabilities / Infrastructure Products / Voided Slabs
Precast Voided Slab Beams
Shallow prestressed bridge members with internal voids, for short-span bridges.
Overview
What are voided slabs?
A voided slab is a shallow prestressed precast concrete bridge member with hollow voids formed along its length. The voids reduce the weight of the member without giving up much strength.
Voided slabs are placed side by side to form the bridge superstructure and the deck surface in one step. Their shallow depth suits crossings where clearance under the bridge is limited.
They are a common choice for short-span bridges on county and local roads, where a fast replacement matters.
Where it is made
Made at these Coreslab plants
Each plant confirms what it makes and the services it offers. Choose a location to see its full capabilities. Links open in a new tab.
- Albuquerque, New Mexico (opens in a new tab)
- Kansas City, Kansas (opens in a new tab)Used by both DOT's and Railroads ranging in depth from 17" to 21"
- Los Angeles, California (opens in a new tab)
- Marshall, Missouri (opens in a new tab)
- Phoenix, Arizona (opens in a new tab)
- Thomaston, Connecticut (opens in a new tab)
- Tulsa, Oklahoma (opens in a new tab)
Do not see your nearest plant? Contact us and we will point you to the right location.
Applications
Where voided slabs are used
Short-span bridges
County and local road crossings
Creek and drainage crossings
Replacement of ageing bridges
Limited clearance
Shallow section where depth is restricted
Members set side by side to form the deck
Lighter pieces for easier handling
Fast construction
Structure and deck placed together
Short road closures
Little formwork needed on site
Resources
Design data and guides
Technical guides, standard details and plant load tables are in our resource library. The Precast/Prestressed Concrete Institute publishes the industry design standards our plants follow, and each project is built to the requirements of its transportation agency or railroad.
See our bridge beams for longer spans, our bridge and transportation projects, or the other infrastructure products we manufacture.
Process
From design to delivery
Voided slabs start with the project drawings and agency specifications. Our team prepares shop drawings for approval, then casts the members with the void forms in place. Each piece is cured under controlled conditions and checked by our quality staff before it ships.
Our plants follow the quality programs of the Precast/Prestressed Concrete Institute, so every piece meets the same dimensions and strength requirements.
Pieces are trucked to site in the order the contractor will set them, including night deliveries where traffic requires it. Services vary by plant, so your local Coreslab team will confirm what is available for your project.
Questions
Voided slabs: common questions
When is a voided slab the right choice?
Voided slabs suit short spans and sites where the depth of the bridge has to be kept small.
How are the voids formed?
Lightweight void forms are cast into the member in the plant, leaving hollow cores along its length.
Do voided slabs need a topping?
Some bridges use a topping or wearing surface over the slabs and others do not. The agency design for the project sets the requirement.
Which plants make voided slabs?
Availability varies by plant. Contact us and we will direct you to the right Coreslab location.
Contact us
Replacing a short-span bridge?
Share your plans and our team will help with member sizes, schedule and delivery.
Get in touch