A hollow core slab is a precast, prestressed concrete plank with continuous hollow voids running along its length. It is one of the most widely used floor and roof systems in commercial, institutional and multifamily buildings.
How a hollow core slab is made
Hollow core slabs are produced on long steel casting beds in a plant. High-strength steel strands are stretched along the bed and tensioned. Machinery then places a stiff concrete mix around the strands while forming the continuous voids. After the concrete gains strength, the strands are released, which compresses the concrete and gives the plank its capacity. The long cast is then sawn into planks at the length the project requires.
Why the voids matter
The voids remove concrete where it contributes little to bending strength. That makes each plank lighter than a solid slab of the same depth, which reduces the load on beams, walls and foundations, and makes the planks easier to ship and erect.
Typical uses
- Floors and roofs in apartments, dormitories and hotels
- Schools, universities and healthcare buildings
- Offices and mixed-use buildings
- Parking structures and podiums
- Warehouses and industrial buildings
Benefits for owners and designers
- Speed: Planks are manufactured in advance and set quickly by crane, giving the following trades a dry working platform sooner.
- Long spans: Prestressing allows wide open spaces and fewer interior supports.
- Flat underside: The smooth bottom surface can be painted and left exposed, or covered with a ceiling.
- Fire resistance: Concrete is noncombustible, and hollow core floors can provide fire-resistance ratings depending on thickness, cover and topping.
- Sound control: The mass of concrete helps reduce sound transmission between floors, important in multifamily and hotel buildings.
- Durability: Hollow core is resistant to rot, pests and mold.
Design considerations
Engineers design hollow core floors using published load tables, which relate plank depth, span and load. Planks can be topped with a structural or non-structural concrete topping, and openings for stairs, shafts and mechanical systems are planned with the producer in advance. You can download load tables and technical bulletins in our resources library.
Hollow core from Coreslab
Coreslab plants across North America produce hollow core in a range of depths and provide engineering, delivery and installation. Explore our structural precast products or find your local plant to talk with a team near you.
This article is general information, not engineering advice. Final design must be completed by a licensed engineer.
FAQ
Frequently asked questions
How strong is a hollow core slab?
Capacity depends on the depth, strand pattern, span and topping. Designers use load tables from the producer to select the right plank for each span and load.
Can you cut openings in hollow core slabs?
Openings are normally planned during design and coordinated with the producer. Cutting or coring after installation should only be done as approved by the engineer of record.
Are hollow core slabs only used for floors?
No. They are also used as roof planks, and in some applications as wall panels.
Featured projects






